ADC Programmable Series manual High-Density Patching Systems Individual Jack Access, Features

ProPatch® Programmable Series

High-Density Patching Systems

Individual Jack Access

® Programmable Series

Each ProPatch® Programmable panel features individual jack cards. Cards contain an individual circuit pair of jacks, front panel circuit status snap-in icon, and seven-position gold plated sealed DIP switch for normal and ground configuration. The gold-plated header card plugs and sockets contained in the chassis ensure maximum reliability.

To remove a jack, remove the top and bottom designation strips, push down the locking tab on the jack module and slide the module out from the front of the chassis. It is not necessary to remove the entire panel from the rack, or the cover from the chassis. Unauthorized circuit changes are eliminated because switches are hidden from front panel view.

The ProPatch Programmable system is the

only product in its class that passes demanding MIL-202 environmental testing for thermal shock, resistance from moisture contamination, plating corrosion from salt fog, and vibration to simulate long-term fixed installation and over-the-road use.

Bantam

ProPatch Programmable panel allows individual front- panel jack access for normals and grounds without having to take the entire panel off-line. Special 7-position DIP switches allows configuration of the circuit normal and grounds without cumbersome jumpers or pins to lose. (See-through cover in photo is for demonstration purposes only.)

Longframe

Features

5 / 0 8 • 1 0 4 9 7 4 A E ProPatch

•Industry’s only bantam and longframe audio panel fully qualified to meet demanding military standards (MIL-STD 202F for ruggedness, and MIL-J-641E for jack compliance)

•Lightweight panels weigh only 6.2 pounds (2.8 kg)

•High-density bantam 2x48 WECO-compliant bantam jacks on 0.312-inch centers

•High-density 2x32 or 2x24 longframe jack on

.500-inch centers

•Gold plated DIP switch selectable circuit normals and grounds

•Shallow depth chassis determined by connector style

•Fully AES/EBU 110 W digital and analog compliant

•Modular design allows individual jack access/ configuration without affecting other circuits

•Grounds can be configured on an individual circuit basis for lift, chassis, sleeve, and common ground

•Modules snap into place, tabs lock into chassis

•Circuit status icons allow users to identify circuit status with snap-in icons in eight colors

•Designation strips cover tabs to prevent unauthorized access to circuit configuration switches

•Converts to a 1.5 rack unit panel with a patent- pending escutcheon kit

•Largest designations on the market Bantam: .410" for 1 RU Longframe: .313" for 1 RU

Bantam and Longframe: .680" for 1.5 RU

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 2