UniPatch® Modular System
RS-422 Modules
The UniPatch® Category 3 compliant RS-422 module raises the standard in machine control patching with its quality and robust design. Now you can patch machine control data properly using reliable, durable, military-grade jacks rated for 30,000 insertion/withdrawal cycles. Each circuit switches all ten pins, making the module fully SMPTE 207M compliant. Compared to other systems employing light-duty RJ45 connectors rated at fewer than 500 insertion/withdrawal cycles or bantam jacks that do not switch all signal lines, the UniPatch RS-422 module is a significant advance in machine control patching.
Features
•The standard in professional data patching
•Durable military-grade switch system rated for 30,000 insertion/withdrawal cycles. Unlike RJ45 systems, suitable for heavy daily professional use.
•Fully SMPTE 207M compliant circuits switch all ten pins, unlike bantam systems, which do not switch all ground pins, potentially causing problems
•Tough military-grade, gold-plated switch with long cantilever beam springs and unique self-wiping contacts ensures against premature wear and provides positive contact force
•RS-422 cards offer the highest density available. Up to 32 modules in two rack units for 33 percent greater density
•Normalled or non-normalled cards available
•Modular termination options: Dsub9, DB-25, EDAC 90-pin plug, QCP II, Ultra Patch, standard-density, 24 per frame, or Dsub9 high-density, 32 per frame (requires thin shell strain relief)
•Keyed for proper patch cord orientation
•Category 3 compliant for 10 Base-T data
