25
Remote connection by Web browser
You can use a standard Web browser (supported versions) to gain access to
the iPEPS and its host computer. As soon as you make contact with the iPEPS it
will begin downloading a small Java application to your browser, which will be
used only for the duration of your connection.
The previously entered iPEPS
address will be shown here
Options button
Provides a range of viewer and connection settings - MORE [+]
4 Make any necessary option/encryption changes and click the OK button
to proceed. Depending on the options selected, you may need to confirm
certain items.
5 A second connection attempt will be made and if successful, an
authentication dialog will be displayed:
6 Enter your username and password. The viewer window should now open
and show the current host computer. Note: If the Username entry is blanked
out then only admin user account is currently defined and only a password is
required.
If required, select the
encryption mode - MORE [+]
To connect using your Web browser
1 Launch your standard Web browser as usual.
2 In the Address section, type the address of the iPEPS as follows:
http://v.w.x.y
where v.w.x.y is the IP network address, for example 192.168.0.3
• If you have been asked to also enter a port number.
3 Press . A connection attempt will be made. In the browser window,
select the ‘Connect using built-in Java VNC viewer’ option to download
a small application that will temporarily empower your browser (on slow
connections the application download can take several tens of seconds to
complete). Once complete, a connection details dialog will be displayed: