User’s Guide
CTK-CKAL Check-All Universal Cable Tester
Overview:
Addlogix’s
the same result as the main unit, and it also has its own pair of TX / RX ports to conduct testing on its own.
Features:
•Test RJ45 (8P8C) as well as RJ48 (10P10C) cables
•Provides
•Traces cable / network port with its
•Checks datacomm / network, voice / telecomm, cross over and shielded cables for shorts, opens, crossed pairs, and
•Provide test results on both the main test unit and the secondary test unit
•Auto off with low battery indicator prevents misreads
•Great for home office and commercial network installations and maintenance
Operations:
1.Testing a Cable: Since test results are available on both the main and the secondary test units, plug on end of the cable into the main test unit’s TX socket and the other end to the secondary test unit’s RX socket. Simply push the “On/Mode” button to display the test results.
2.Available Test Modes: Set the tester at different testing modes by using the “On/Mode” buttons.
a.TX → RX test mode: Press On/Mode once to allow test signals are sent from the TX port through the cable into the RX port
LED will illuminate in sequence one at a time on both the main unit and