
Trouble shooting 
A Can only see “8GB Unallocated”  
Possible reasons are: 
A-1 You did not install any hard disk. 
A-2 During initial installation you forgot to press “RAID Setting” button once. 
A-3 You have change the Raid mode but forgot to press “RAID Setting” button 
once. 
B-1 Normally, it is because you have changed Raid mode setting but did not 
delete the previous Raid partition.  In this case, you will have to delete the 
previous Raid partition on the hard disks and then, re-organize your hard 
disks again.  
C Hard disk LED indicators are blinking with green/red 
C-1 This is because the Safe (mirror) mode is rebuilding.  It usually occurs during 
initial setup of the Saf e(mirror) mode or you change the new hard disks. 
C-2 The LED blinking will return to normal after rebuilding process is finished. 
C-3 While the Safe(Mirror) is rebuilding or verifying, you can still use the hard 
disks, only the performance will be slower than expected.  
D Hard disk LED light on Red or Red blinking 
d-1 It means the this hard disk is not put in or not connected properly or the put in 
hard disk is failed.  
E Red LED “PWR/Backup”  is blinking 
E-1 It means you already push the ‘Back up” button and ready to proceed the 
back up. 
F LED “PWR/Back up” does not light on 
F-1 It means the hard drive has problem under Safe(Mirror) Mode. 
G When powering on, you can hear the ‘clicker’ sound 
G-1 That means you have not connected the USB power cable to a USB port 
properly or the USB power socket does not supply enough power. 
H Can not see the correct device data under “57xx SteelVine Manager” 
H-1 You can click the upper left icon “File” & click “Scan Drives” from pop-up 
window to see it. 
Technical Support 
If you need assistance to get your unit functioning properly, please call Addonics 
Technical Support.  Our technical staff will be happy to assist you, but they will 
need your help to do so.  Calling the technical support staff without all the proper 
information can be both time consuming and frustrating.  Here are some tips to 
help you out: 
 MODEL NUMBER – Please have this number on hand. 
SYSTEM INFORMATION – Type of computer, peripherals, etc. 
   OPERATING SYSTEM – What version of Windows    
   WHAT’S THE TROUBLE? – Give enough information  
about your problem so that we can recreate and diagnose it. 
FREE Software Drivers for all Addonics Technologies 
Products are available 24 hours per day at the  
World Wide Web Site: www.addonics.com 
Contact Information 
Phone:    408-573-8580 
Fax:    408-573-8588 
Email:    http://www.addonics.com/sales/query/ 
Internet:   http://www.addonics.com 
TECHNICAL SUPPORT 
Phone:    408-453-6212 
Hours:    8:30 am - 6:00 pm PST 
Email:    http://www.addonics.com/support/query/