Initial Setup
This procedure only needs to be done when setting up the CipherUSB for the first time, or when a new password is desired. The CipherUSB will retain the last password it was programmed with and otherwise does not require any driver or software to work.
1.Connect the CipherUSB to a computer running Windows, and connect a USB storage device into the CipherUSB. The CipherUSB will not respond until a working storage device is connected to its USB device port.
2.Run the program CipherUSB.exe. The following dialog box should appear:
3.Click OK to proceed to the utility. Choose a password as short or as long (up to 32 characters) as desired, and enter it into the “Setup” and “Confirm” fields. Then click Start.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
