HD LED
Auxillary Power Switch
HD LED
R
eSATA
Cipher
HD Power Switch
HDD
CipherChain
PWR
eSATA Port
Power & HDD LED
Cipher Keyhole
II.Connecting the power cable and Cipher Tower to the computer
a.Connect the power cord provided from the wall outlet to the back of the Cipher Tower.
b.A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary switch is located on the front of the tower.
c.Make sure the power is off on the auxiliary switch (power LED light should be off)
d.Connect the provided eSATA cable from the back of the Cipher Tower to the eSATA controller card on the computer.
Note: Check with your system supplier to confirm the PM support on your existing eSATA port
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
