Addonics Technologies DCMR256I manual Model DCMR256SC, Technical Support

Model: DCMR256SC

Power: Using the 4-pin floppy connector of the Y-cable, connect it to the floppy- type power connector on the converter. To provide power for the y-cable, connect it to one of your desktop's 4-pin molex cable.

Data: Connect the SCSI cable to the 68-pin SCSI connector of the SATA to SCSI converter board and to your SCSI controller.

LED cable: No need to connect. By factory default, LED signal would come from the hard drive.

Powering On Drive Cradle: To power on the drive cradle, slide in the Diamond cartridge and using the key (supplied), turn the cradle lock located at the front of the cradle to the LOCK position. This will provide power as indicated by the green LED lighting up and secure the cartridge.

IDE-SCSI Converter

Power & Drive		68-pin SCSI
Activity LED		ribbon cable
	Key Lock Switch

Note: This configuration would not support hot-swap.

Technical Support

If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time consuming and frustrating. Here are some tips to help you out:

MODEL NUMBER – Please have this number on hand. SYSTEM INFORMATION – Type of computer, peripherals, etc. OPERATING SYSTEM – What version of Windows WHAT’S THE TROUBLE? – Give enough information

about your problem so that we can recreate and diagnose it.

FREE Software Drivers for all Addonics Technologies

Products are available 24 hours per day at the

World Wide Web Site: www.addonics.com

Contact Information

Phone:408-573-8580

Fax:408-573-8588

Email:http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

TECHNICAL SUPPORT

Phone:	408-453-6212
Hours:	8:30 am - 6:00 pm PST
Email:	http://www.addonics.com/support/query/