Addonics Technologies ZSAUSCSF manual Connecting the Drive to a Computer, Technical Support, Step

Screw holes

Step 3

Use the enclosed screws to secure the hard drive to the tray.

Step 4

After the hard drive is installed, slide the tray back into the enclosure and then fasten the two screws properly.

Connecting the Drive to a Computer:

1.Boot-up your computer. Make sure the USB2.0 or Firewire port from the computer functions well.

2.Connect the power adapter of the enclosure.

3.Connect the USB or Firewire USIB cable to the USIB port on the back of the enclosure and the other end to the USB or Firewire port on the computer. Turn on the switch.

Note: Windows 2000 & XP use built-in drivers. No need to install third-party drivers.

Technical Support

If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time consuming and frustrating. Here are some tips to help you out:

MODEL NUMBER – Please have this number on hand. SYSTEM INFORMATION – Type of computer, peripherals, etc. OPERATING SYSTEM – What version of Windows WHAT’S THE TROUBLE? – Give enough information

about your problem so that we can recreate and diagnose it.

FREE Software Drivers for all Addonics Technologies

Products are available 24 hours per day at the

World Wide Web Site: www.addonics.com.

Contact Information

Phone:408-573-8580

Fax:408-573-8588

Email:http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

TECHNICAL SUPPORT

Phone:	408-453-6212
Hours:	8:30 am - 6:00 pm PST
Email:	http://www.addonics.com/support/query/