ADIC Version 2.7 manual Reports and Queries, RrequestID

Reports and Queries

Command	Options	Description
fsfileinfo		Reports the current location of
		files, whether of disk, media or
		not in the system.
	filename	Full path and filename of the
		file.
fsqueue		View subsystem resource
		requests.
	[-f ]	Reports all files in the queue or
		specific files if request
		identifiers or filenames are
		specified.
	[ -m ]	Reports media movement for a
		request identifier or all media in
		the queue.
	filename	Path and filename of the file.
	[ -rrequestID ]	Identifier of the request to be
		reported.
fsmedlist		Lists media in a data or storage
		area.
	[ -c class ]	Policy class for which the report
		is to be generated.
	[ -g ]	Reports on blank media in the
		general scratch pool.
	[ -l ]	Lists media in the long report
		format.
	[ -k ]	Lists all media marked for
		check out.
	[ -m ]	Lists all media marked for
		removal.
	[ -b ]	Lists unformatted blank media.
	[ -f ]	Lists formatted blank media.
	[ -j ]	Lists all media marked to
		contain duplicate files.
	[ -p ]	Lists all write-protected media.
	[ -q ]	Lists media with mark error.
	[ -a ]	Lists all available media.
	[ -n ]	Lists all media unavailable to
		SNMS software.
	[ -u ]	Lists all media marked as
		unavailable but still located in
		SNMS system.

Command	Options	Description
	[ -s ]	Lists all suspect media.
	[ -d ]	Lists all media located in a
		drive.
	[ -h ]	Lists all media located in its
		home slot/bin.
	[ -t ]	Lists all media transitioning
		between locations.
	[ -z ]	Lists all media exiting a storage
		area.
	[ -o ]	Lists all media checked out of
		storage areas.
fsstate		Reports the state of drive
		components, storage
		subsystem, and SNMS
		software.
	[ componentalias ]	Alias for drives and storage
		subsystems.
	[ -f ]	Generates a report showing the
		status of SNMS software.
		Valid states are:
		• Active
		• Not Active
		• Not Available
fsusedspace		Reports the total amount of
		stored, primary copy data in the
		SNMS system (in GB).

Copyright © 1996-2006 by ADIC. All rights reserved.

6-00361-14 Rev A. ADIC Technical Assistance Center: in North America,

call toll-free: 1-800-827-3822; in Europe, call toll-free: 00800-9999-3822; outside North America, go to the ADIC website at www.adic.com/contact for a complete list of toll-free numbers by country. Technical Support: www.adic.com/techsup.

Page 1 Page 2 Page 3