ADTRAN 1200 warranty Provisioning Options, Settings Defaults in Bold

TOTAL ACCESS 1200 QUAD IMA MODULE

PRICING AND AVAILABILITY 800.827.0807 TECH SUPPORT 800.726.8663 RETURN FOR REPAIR 256.963.8722 www.adtran.com 61179611L1-22B

PROVISIONING

The Total Access 1200 has a front panel mounted DB-9 connector that supplies an RS-232 interface for connection to a controlling terminal. The supported terminal type is VT100 or compatible and is set for 9600 baud, 8 data bits, no parity, and 1 stop bit.

At the Total Access 1200 Login screen, enter the account name and password. Note that the default login is “ADMIN” and the password is “PASSWORD” and can be changed upon initial login. The login and password are case sensitive.

NOTE: To traverse through the menus, select the desired entry, and press Enter. To work backward in the menus, press the Escape key.

PROVISIONING OPTIONS

Upon initial installation, the Quad IMA Module will be provisioned according to factory default settings as shown in the table below.

Provisioning Option	Settings (Defaults in Bold)
PVCs	User definable (Each ADSL connection must have at least one PVC/PVP for
	proper operation (No default)
Traffic Descriptors	UBR; CBR; VBR-rt; VBR-nrt
Subtend Configuration, Mode	Enabled (Master); Disabled (Slave)
T1 Provisioning Options
T1 Type	DSX; T1
T1 Framing	ESF; SF
T1 Line Code	B8ZS; AMI
T1 Line Build Out
DSX Type:	0-133 ft; 133-266 ft; 266-399 ft; 399-533 ft; 533-655 ft
T1 Type:	0 dB; –7.5 dB; –15 dB; –22.5 dB
IMA Options
IMA Facility (1-4)	IMA_Group; Pass-through; Unassigned
IMA Transmit ID	0-255 (1 default)
IMA Transmit Frame Length	32; 64; 128; 256
Minimum TX Active Links	1-4
Minimum RX Active Links	1-4
Maximum Link Diff Delay	0-100
Group Operation Mode	In Service; Out of Service – Maintenance; Out of Service – Unassigned
ADSL Options
Card Service State	In Service; Out of Service – Maintenance; Out of Service – Unassigned
Line Service State	In Service; Out of Service – Maintenance; Out of Service – Unassigned
Service Mode	Multimode; T.413, G.dmt; G.liet
Link Down Alarm	Disabled; Enabled
Rate Mode	Fixed, Rate Adaptive
Line Type	Interleave; Fast
Target SNR Margin	0 – 15 dB (6 dB default)
Max SNR Margin	0 – 31 dB (9 dB default)
Min SNR Margin	0 – 31 dB
Fast Max TX Rate	32 – 8160 kbps Downstream
Fast Min TX Rate	32 – 896 kbps Upstream
Interleave Max TX Rate	32 – 7616 kbps Downstream
Interleave Min TX Rate	32 – 896 kbps Upstream
Interleave Max Delay	5 – 255 ms (5 ms default)
LOS Secs	0 – 900 with 0 = Disabled
ES Secs	0 – 900 with 0 = Disabled