Total Access 1240 Installation and Maintenance Practice
5-36 61179605L5-5B
Password Control Menu
The Password Control menu (see Figure 5-24) is used to set and modify passwords, logout
times, and restore default passwords.
Figure 5-24. Password Control Menu
The Password Control menu options are shown in Table 5-28.
CAUTION
When the Restore Default Passwords option is selected, the pass-
word controls automatically restore to the default setting without
additional prompting.
Table 5-28. Password Control Menu Options
Option Description Function
1Set Passwords This option displays the “Password Control Levels
Screen” on page 5-37.
2Allow SNMP security
management This option is used to enable or disable SNMP security
management.
3Set Idle Logout Time This option is used to set the time allowed before an
automatic logout is performed. This option must be set
between 1 and 60 minutes.
4Restore Default Passwords This option is used to restore all passwords to the
default settings.
Total Access 1240 - IPoE Fed
Unacknowledged Alarms: None
Password Control
1. Set Passwords None Configured
2. Allow SNMP security management Disabled
3. Set Idle Logout Time 10 minutes
4. Restore Default Passwords
Selection :
'?' - System Help Screen