TOTAL ACCESS ® 4303 DC POWER SUPPLY | JOBAID |
| 0210 |
|
|
DC SUPPLY
DCLEI: SLPOCD0C_ _
SUPPLY1200335L1TEMPPOWER
|
FRONT PANEL LEDs
POWER | ● Off | Both |
|
| incorrect polarity on the voltage supplied to the shelf |
| ● Green | Power supplied is the correct voltage and polarity; backplane |
|
| and hot insertion voltages correct |
| ● Amber | |
|
| voltage |
| ● Red | |
|
| insertion voltage |
TEMP | ● Off | Normal |
| ● Red |
FUNCTIONALITY
The Total Access 4303 DC Power Supply furnishes the voltages necessary for proper backplane operation. The DC Power Supply also provides the voltages that enable hot insertion of the option cards and SCUs. The DC Power Supply does not, however, provide the voltages necessary to power individual option cards or the SCUs as each card has itís own
In addition, the DC Power Supply in slot
INSTALLATION
■Insert the module into either the slot labeled
■When power is supplied to the shelf, verify that the Power LED is green.
■If power is supplied to the shelf and the Power LED does not illuminate, remove power and verify polarity.
■To verify one or both
SPECIFICATIONS
SpecificationsInput Voltage | |
Operating temperature | 0ºC to 50ºC |
Storage temperature | |
90ºC ± 10ºC | |
Fused (1 amp) | |
Backplane voltage short circuit protection | |
Relative Humidity | To 95% noncondensing |
Compliance | FCC Part 15, UL 60950, NEBS Level 3 |
Warranty | 10 years |
COMPLIANCE
The Total Access 4303 DC Power Supply is NRTL listed to the applicable UL standards. The Total Access DC Power Supply is to be installed in a restricted access location and in a Type “B” or “E” enclosure only.
Code | Input | Output |
Power Code (PC) | F | C |
Telecommunication Code (TC) | – | – |
Installation Code (IC) | A | – |
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by ADTRAN could void the user’s authority to operate this equipment.
WARRANTY
Warranty for Carrier Networks products manufactured by ADTRAN and supplied under Buyer’s order for use in the U.S. is ten (10) years. For a complete copy of ADTRAN’s U.S. and Canada Carrier Networks Equipment Warranty
(P/N
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
■ For a complete Installation and Maintenance Practice (P/N