
Quick Start Guide
DSX-1
1200385L1
| For more detailed documentation, visit us online at www.adtran.com |
Total Access 850 | P/N 1200385L1 |
|
|
The Total Access 850
STATUS
SPECIFICATIONS
Capacity | T1: 1 to 24 DS0s |
Framing | ESF and SF (D4) |
Line Build Out | |
Line Coding | AMI (alternate mark inversion) or B8ZS (bipolar 8 |
| zero substitution) |
Line Rate | 1.544 Mbps ± 75 bps |
Terminating | 100 Ω ± 5% |
Impedance |
|
Tests | |
| and remote payload |
Environmental | Operating Temperature: 0° C to 50° C |
| Storage Temperature: |
| Relative Humidity: Up to 95% noncondensing |
LED DESCRIPTIONS | |
Color | Description |
|
|
OFF | No power to the system |
GREEN | |
| |
RED | Active channel alarm on the |
Solid AMBER | Channel test in progress |
Blinking AMBER | Module is initializing (during startup) |
DSX-1 CONNECTION PINOUT
Pin | Name | Description |
|
|
|
1 | R1 | Receive data from the network |
|
| (RING) |
2 | T1 | Receive data from the network (TIP) |
3 | UNUSED | |
4 | R | Transmit data towards the network |
|
| (RING) |
5 | T | Transmit data towards the network |
|
| (TIP) |
UNUSED |
INSTALLATION INSTRUCTIONS
1.Remove the cover plate from the appropriate slot of the Total Access 850 chassis.
Dangerous voltage is exposed when the cover plate is removed.
2.Position the module to fit in the lower and upper grooves.
3.Slide the module into the option slot, pressing equally on the top and bottom of the faceplate until the module is firmly positioned against the back of the chassis.
4.Push in the ejector on the lower
Quick Start Guide, | Technical Support | © 2004 ADTRAN, All Rights Reserved |