AIMB-760 User Manual 6
1.4 Jumpers and Connectors
Connectors on the AIMB-760 motherboard link it to external devices
such as hard disk drives and a keyboard. In addition, the board has a num-
ber of jumpers used to configure your system for your application.
The tables below list the function of each of the board jumpers and con-
nectors. Later sections in this chapter give instructions on setting jump-
ers. Chapter 2 gives instructions for connecting external devices to your
motherboard.
Table 1.1: Jumpers
Label Function
J1 CMOS Clear
J2 Watchdog timer output selection
J12 ATX, AT mode selector
Table 1.2: Connectors
Label Function
CN1 Primary IDE connector
CN3 Floppy Drive Connector
CN4 Parallel port
CN6 USB Port 4, 5
CN7 VGA connector
CN9 Serial port: COM1
CN10 Serial port: COM2
CN11 PS/2 keyboard and mouse connector
CN12 External keyboard connector
CN13 Infrared connector
CN14 CPU FAN connector
CN15 System FAN connector 1
CN16 Power LED and Keyboard Lock
CN17 External speaker
CN18 Reset connector
CN19 HDD LED connector
CN21 ATX soft power switch (PS_ON)