Chapter 1 General Information 3
1.2 Specifications1.2.1 Standard System On Module SBC functions
•CPU: Onboard NS Geode GX1-300 MHz 2.0 V processor
•BIOS: Award 256KB Flash memory
•System memory: One 144-pin SO-DIMM socket accepts 64~256MB
SDRAM.
•Enhanced IDE interface: 2EIDE channels support up to 4 IDE
devices. BIOS auto-detect, PIO Mode3 or Mode4, UDMA/33
transfer
•FDD interface: Support one FDD share with Parallel Port
•Serial ports: 2 serial port interfaces COM1: RS-232; COM2: RS-232
(TTL Output)
•Parallel port: One parallel port interface, supports SPP/EPP/ECP
parallel mode
•Infrared port: One 115 Kbps infrared port, IrDA 1.0 compliant
•Keyboard/mouse connector: Supports standard PC/AT keyboard
and PS/2 mouse interface
•USB interface: Two USB ports compliant with USB Spec. Rev.1.1
•Power management: APM 1.2 compliant
•Watchdog timer: 62 levels timer interval, reset to system. Jumperless
selection and software enable/disable
1.2.2 Local-bus VGA interface
•Chipset: NS CS5530A
•Display memory: 1 ~ 4 MB share memory, set in BIOS
•Display type: Supports CRT and TTL LCDs. Able to display both
CRT and flat panel simultaneously