AEG 102 D manual What to do if, Symptom, Solution

14

What to do if

If your appliance fails to work properly please carry out the following checks.

Symptom	Solution
The cooker hood will not start...	Check that:
	The hood is connected to
	the electricity supply.
	Check that the fan speed
	control is set to 1, 2 or 3.
The cooker hood is not working	Chec k that:
effectively..	The fan speed is set high
	enough for the task.
	The grease filters are
	clean.
	The kitchen is adequately
	vented to allow the entry of
	fresh air.
	If set up for recirculation,
	check that the charcoal
	filter is still effective.
	If set up for extraction,
	check that the ducting and
	outlets are not blocked.
The cooker hood has	The safety cut-out device
switched off during operation...	has been tripped.
	Turn off the hob and then
	wait for the device to reset.
	If the hood has been
	installed below the heights
	indicated in the installation
	instructions the motor will
	cut-out frequently which
	will damage the hood.

If after all these checks, the problem persists, contact your local Service

Force Centre, quoting the model and serial number.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.