AEG Milano 20_en 7
Configuration Setting the ringer volume
The volume of the ringer can be set to low, medium or high, using the sliding
switch on the side of the appliance. It can also be switched off.
Insert a pause
When you use the telephone connected behind an older PABX, it is possible
that the access code for external calls (generally "0") must be followed by a
pause, before the telephone number may be dialed.
h Unhook.
n Enter the access code for external calls.
Pause Press the pause key, the pause is inserted.
n Enter the telephone number you wish to call.
Setting the dialing mode
Two dialing modes are available:
• MFV (tone): the actual standard (DTMF mode)
• IWV (impulse): only necessary for older installations
To set the dialing mode, use the sliding switch (F) on the side of the appliance,
T for tone dialing, P for impulse dialing.