Introduction
Extractor version
•The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one activated carbon filter (special accessory).
•You will need original AEG carbon filter for this function (see Special Accessories).
•The air is discharged to the outside through a pipe, which must be fitted to connection flange A. Fig. 1.
•In order to obtain the best performance the hose should have a diameter equal to the outlet hole.
Should there already be a pipe of diameter 125 mm that ducts to the outside through the walls or roof, it is possible to use the 150/ 125 mm reduction flange provided. In this case the hood will be slightly more noisy.
A 
Fig. 1
Filter Version
•The air is filtered through an activated charcoal filter and returned to the kitchen through the top grill of the outlet pipe.
•You will need an original AEG KF20 activated carbon filter for the filtering function. (See Special Accessories).
•Fix the deflector using 4 screws Ø 3,5x6.5 mm. Fig. 2.
•Optionally, the position of the chimney elements can be changed. When using the hood in the filter version the chimney must be fixed at the top, with the air outlet grill at the side.
51
