27
Problems you
can solve
yourself
What to do if ...... The washing machine does not work at all ?
Is the machine connected to the power supply?
Was a programme selected?
Was a temperature selected?
Are all the lids closed?
... No water runs in ?
Is the water tap open?
Is the filter in the water inlet blocked ?
... The spin cycle begins after a delay ?
The electronic unbalance control system of the ma
chine has operated due to unfavourable distribution of
the wash. The wash is separated by reversing
movements of the drum, redistributed and the spin
cycle begins again. This can occur several times until
the unbalance is removed and spinning can finally
begin.
... The washing machine vibrates or does not stand
still ?
With very small loads (e.g. only a bathing costume) the
machine may vibrate. This has no effect on operation.
Are the adjustable feet properly adjusted? Follow the
instructions for installation
Is the discharge hose bent ?
Are the transport securings completely removed ?
Follow the instructions for installation
... The detergent in the main wash foams strongly ?
Was too much, or the wrong detergent used ? Check
the quantities added more precisely.
... Water runs out from under the machine ?
Is the inlet hose connector loose ?
Is the hose clamp on the discharge hose loose ?
Is the discharge hose damaged ?
Is the lint filter cover properly closed ?
... The wash results are not as usual ?
Was the wrong quantity or the wrong detergent
added ? Insufficient detergent leads to grey washes
and scale deposits in the machine. Check the
quantities more exactly.
Were special stains pre-treated ?
Were programme and temperature correctly chosen?
... Despite pre-treatment, stains are not removed ?
They may be stains which cannot be removed by
washing. Ask a specialist.