35.292.805…Lavamat 3085 UK doc. 10/03/2003 12:22 Página 75
Installation
Water inlet
The inlets on the back of the appliance are |
| |
colour coded, blue for cold and red for |
| |
hot. | A | |
Before connecting the hoses, be sure to fit | ||
| ||
the filters “A” supplied as per diagram. |
| |
If only a cold water supply is available, |
| |
connect the two hoses to a cold water |
| |
outlet by means of a ‘Y’ connection piece. | P0003 |
The other end of the inlet hose(s) which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.
The inlet hose(s) must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
Water drainage
The end of the drain hose can be positioned in three ways:
Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying.
This could be done by tying it to the tap with a piece of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground.
75
