AEG 3250-6 KG, 3288-6 KG manual Remove Transport Packaging, Installation, Electrical Connection

Models: 3288-6 KG 3250-6 KG

1 12
Download 12 pages 8.64 Kb
Page 6
Image 6
Remove Transport Packaging

Installation Warning! Before disposing of old appliances make them inoperable. Remo- ve plug from mains, sever the power cable, remove or destroy any snap or latch closures, to prevent small children being trapped inside.

• Use an authorised disposal site.

Contact your local Council or Enviromental Health Office to see if there are facilities in your area to recycle the appliance;

Remove Transport Packaging

The appliance and the interior fittings are protected for transport.

Remove all adhesive tape and packing pieces from the interior of the appliance.

Installation

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING – THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

You can remove any remnants of adhesive using white spirit.

Important!

The wires in the mains lead are coloured in accordance with the fol- lowing code:

Green and Yellow Earth

BlueNeutral

BrownLive

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured mark- ings identifying the terminals in your plug, proceed as follows:

GREEN & YELLOW

13 AMP. FUSE

13 AMP

BROWN

BLUE

CORD CLAMP

D207

1.The wire coloured green and yellow must be connected to the terminal marked with the letter “E” or by the earth symbol or coloured green and yel- low.

2.The wire coloured blue must be connected to the terminal marked “N” or coloured black.

3.The wire coloured brown must be connected to the terminal marked “L” or coloured red.

4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

6

19

Page 6
Image 6
AEG 3250-6 KG Remove Transport Packaging, Installation, Electrical Connection, Warning - This Appliance Must Be Earthed