Electrical Connection

The wire coloured green and yellow must be connected to the termi-

nal marked with the letter “E“ or by the earth symbol or coloured green and yellow

The wire coloured blue must be connected to the terminal “N“ or col- oured black.

The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

Upon completion there must not be cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

1WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

Permanent connection

In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the cur- rent electrical regulations.

The switch must not break the yellow and green earth cable at any point.

10

Page 10
Image 10
AEG 35600 installation instructions Permanent connection