AEG 40810, 40820 manual Installation, User’s instructions

User’s instructions

10.3. Installation

10.3.1. Unpacking

Packing used to protect internal parts of the washing machine during transport must be removed before the washing machine is put into service for the first time.

Remove all packing from the washing machine. Tilt the washing machine sideways and then remove the packing under the motor, and straighten the washing machine.

Tilt the washing machine back-wards, rotate it by a quarter of a turn on one of its corner to remove the transport base.

Open the washing machine lid and remove the immobilization packing and plastic films. Close the lid.

Use a 10 mm spanner to remove the two screws and spacers at the back.

27