AEG 56740 user manual What to do if, Troubleshooting by yourself

20What to do if ...

What to do if ...

Troubleshooting by yourself

If, during operation, the error code E... plus number or letter) appears on the LCD: Switch the machine off and on again. Reset programme. Press the START PAUSE button If the error is still displayed, please inform your local Service Force Centre and quote the error code.

Problem	Possible cause	Remedy
	Mains plug is not plugged in or	Plug in at mains socket. Check
		fuse in fuse box (domestic in-
	fuse is not working correctly.	stallation).
Dryer does not work.
	Loading door is open.	Close loading door.
	Have you pressed the START	Press the START PAUSE button
	PAUSE button?	again.
		Select a different programme
	Wrong programme selected.	the next time you dry (see “Pro-
		gramme chart” chapter).
	Lint filters clogged.	Clean lint filters.
	Fluff filter clogged.	Clean fluff filter.
	Heat exchanger clogged with	Clean heat exchanger.
	lint.
Drying results unsatisfactory.	Overloading of laundry.	Observe recommended loading
		volumes.
	Ventilation slots in base area	Uncover ventilation slots in
	covered up.	base area.
	Residue on inside surface of	Clean inside surface of drum
	drum or drum ribs.	and drum ribs.
	Conductance of water at in-	Re-programme standard set-
		ting for degree of drying (see
	stallation site differs from
		‘Programming options’ chap-
	standard setting of machine.
		ter).
	Fine strainer not in place and/	Install fine strainer and/or snap
Loading door does not close.	or mesh filter not locked in
		large mesh filter into place.
	place.
When a button is pressed, Err	Washing protection. After the	Turn the programme knob to
	start of the programme, the
appears on the LCD.		OFF. Set the programme again.
	option can no longer be set.
	Programme selector in OFF po-	Turn programme selector to
		DRUM LIGHT or to any pro-
Drum light does not work.	sition.	gramme.
	Defective light bulb.	Replace light bulb (see next
		section).