Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accord- ance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be ob- served.
A protective floor must be installed under the appliance.
The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.
The sealant seals the appliance to the work top with no gap. The sealant seals the appliance to the work top with no gap.
Do not use silicon sealant between the appliance and the work top. Avoid installing the appliance next to doors and under windows. Other- wise hot cookware may be knocked off the rings when doors and win- dows are opened.
1 WARNING!
Risk of injury from electrical current.
•The electrical mains terminal is live.
•Observe connection schematic.
•Observe electrical safety rules.
•Ensure
•The appliance must be connected to the electrical supply by a quali- fied electrician.
1IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the ter- minal overheat.
•Have the clamping joints correctedly installed by a qualified electri- cian.
•Use strain relief clamp on cable.
•In the event of
•If this appliance’s mains cable is damaged, it must be replaced by a special cable (type
13