AEG 70330 manual Before the First Wash, Program Selector, Water Energy Time Temperature

Operating Instructions

Consumption Values and Time Requirements

The values for selected programs in the following tables were deter- mined under normal conditions. However, there is a helpful orientation aid for domestic operation.

Program Selector,	Filling Quantity	Water	Energy	Time
Temperature	in kg	in Litres	in kWh	in Minutes
t(COTTONS/LINEN) 95	5	49	1.80	144
t(COTTONS/LINEN) 601)	5	49	0.94	131
t(COTTONS/LINEN) 40	5	54	0.60	128
} (EASY-CARES) 40	2,5	54	0.50	82
à (DELICATES) 30	2,5	50	0.30	55
s(WOOL)/P(Handwash) 30	2	47	0.25	55

1)Note: Program setting for a test in accordance with EN 60 456. The consumption values can deviate from the stated values depending on the water pressure, hardness, inlet temperature, room temperature, type and quantity of washing, the washing powder/liquid used, fluctuations in the mains voltage and selected additional functions.

Before the First Wash

01. Pull out the washing powder drawer slightly.

2.Pour about 1 litre of water through the washing powder drawer into the washing machine. With the next program start, this will close the solution container and the eco-sluice can function correctly.

3.Run the washing cycle without washing (t/COTTONS/LINEN 95 °C, with half the amount of washing detergent). This removes residues left over from production on the drum and solution container.

13