AEG 74610 Running a washing cycle

Running a washing cycle

1.To open the door: gently pull the handle on the door.

When the machine is switched on, the lights (DOOR) and

(START/PAUSE) indicate whether the door can be opened:

2.Unfold washing and load it loosely

into the machine. Mix large and

small items.

Important: Do not get any washing

caught between the door and the

rubber seal.

3.Press the door firmly shut. Door

catch must audibly latch.

Important: Use only detergents and additives that are suitable for use

in domestic washing machines.

Dose detergent and additives according to the instructions of the de-

tergent and additive manufacturers. Follow the instructions on the

packaging.

Dosing depends upon:

–the washing’s degree of soiling,

–the size of the load

–the degree of hardness of the water supply.

•If the manufacturer does not give instructions for small loads: for a

half load, use a third less, for a very small load, use only half of the

detergent that is recommended for a full load.

•From water hardness 2 (= medium) upwards, water softener should

be used. Detergent can then always be dosed for water hardness 1

(= soft). Your local water company will be able to give you informa-

tion about the water hardness in your area.

light (DOOR) light (START/PAUSE) Can the door be opened?

lit green flashes red or is off yes

lit green lit red yes, after pressing the

(START/PAUSE) button

lit red

or is off

flashes red

or lit red

no, water level too high or

temperature too high