AEG 88810 Installation and connection instructions 1Safety information for the installation, Installing the appliance, 1

Installation and connection instructions1Safety information for the installation

•This washing machine cannot be built-in.

•Before using for the first time, check the appliance for damage sus-

tained while it was being transported. Do not under any circumstanc-

es connect an appliance that is damaged. In the case of damage,

please contact your supplier.

•Before using for the first time, all parts of the transport lock must be

removed. Otherwise when spinning damage may be caused to the ap-

pliance or to neighbouring units or furniture.

•Before using the appliance for the first time, splash protection must

be completed. (See “Removing the transit packaging”.)

•Always plug the mains plug into a correctly installed shockproof

socket.

•Prior to using the appliance for the first time, ensure that the rated

voltage and type of supply on the rating plate match that of the sup-

ply where the appliance is to be installed. The fuse rating is also to be

found on the rating plate.

•If work on the plumbing is required for the proper connection of the

washing machine to the water supply, this must be undertaken by a

competent person.

•If work on the electricity supply system is required for the proper

connection of the washing machine to the electricity supply, this

must be undertaken by a registered electrician.

•Should the appliance power supply cable need to be replaced, this

must be carried out by our Service Force Centre.

•The power supply cable must be easily accessible after installing the

appliance.

•Connect the machine to an earthed socket.

Installing the appliance

1Warning! The washing machine is very heavy. Risk of injury. Be careful

when lifting.