AEG 88840 user manual Installation, Use

Models: 88840

1 48
Download 48 pages 60.99 Kb
Page 4
Image 4

4Important safety information

When removing from the socket, never pull the mains plug by the cable, instead take a hold of the plug.

The height adjustable screw feet must never be removed.

The plug must be accessible after installing the machine

Manifold plugs, couplings and extension cables must not be used. Risk of fire from over- heating!

Do not spray down the appliance with jets of water. Risk of electric shock!

Do not lean on the open door. The appliance may tip over.

Once the drying cycle or ProSteam programme has been interrupted, the laundry and drum may be hot. Risk of burns! Take care when removing the laundry.

Take care when interrupting the ProSteam programme: Do not open the machine door during the steam phase. Hot steam may result in burns. The display shows a message to indicate the steam phase.

The final part of a drying cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.

Caution – Hot surface:

Do not touch the back of the appliance while it is operating.

WARNING!

Never stop a tumble dry before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. Risk of fire!

Risk of electric shock! Do not spray down the appliance with jets of water.

Installation

Note the "Installation" instructions.

Important! Appliance must be moved in vertical position for transport.

This appliance is heavy. Care should be taken when moving it.

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.

All packing must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.

After having installed the appliance, check that it is not pressing or standing on its electrical supply cable.

If the tumble dryer is placed on top of a washing machine, it is compulsory to use the stacking kit (optional accessory).

Use

The appliance is intended for drying and steam treatment of standard laundry in do- mestic applications.

This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.

Only wash fabrics which are designed to be machine dried. Follow the instructions on each garment label.

Page 4
Image 4
AEG 88840 user manual Installation, Use