Maintenance and care
•The hood must always be disconnected from the electricity supply before beginning any maintenance work.
•Never insert pointed objects in the motor’s protective grid.
•Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders.
•Only ever clean the switch panel and filter grille using a damp cloth and delicate detergents.
•It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard.
Grease Filter
•The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external evacuation or internal recycling function.
The synthetic filter is very thin (approx. 1 mm) and positioned on the inside of its related support grille.
The filter should be changed once a month.
•The grille should be cleaned with luke warm water and
•The grease filter can be ordered from your local ELECTROLUX Service Force Centre.
Opening the grid
•Move the two sliders towards the centre (in the “OPEN” direction) and release the grille downwards. Fig. 6.
To refit the grid: it should be inserted above between the appropriate guides until it latches into place, and after having propped the grille to the cooker hood also in the lower part move the two sliders outwards (in the “CLOSED” direction).
Removing the filter
Remove the stops to take out the filter. Fig. 6.
•Clean the inner housing using a hot detergent solution only (never use caustic detergents, abrasive powders or brushes).
Taquets
Guides
|
| D |
|
| E |
| S |
|
| O |
|
L |
|
|
C |
|
|
N |
|
E | N |
P | |
O | E |
| P |
| O |
D E S O L C
Fig. 6
61
