Energy Saving Tips
•Do not install the appliance near radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent opera- tion of the compressor.
•Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings.
•Do not place warm foods into the appliance. Allow warm foods to cool first.
•Only leave door open as long as necessary.
•Do not set temperature any colder than necessary.
•Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.
Something Not Working
If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre.
Warning!
Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.
3.Place frozen foods in the drawers sorted by type, as far as possible.
Preparation of Ice Cubes
1.Fill the ice cube tray 3/4 full with cold water, place it in the freezer com- partment and leave to freeze.
2.To loosen the frozen cubes, either twist the ice cube tray or hold it under running water for a few seconds.
Important! Never try to free an ice tray that is frozen to the freezer com- partment using pointed or sharp edged objects. Use the ice scraper supplied.
Frozen Food Symbols/Freezing Calendar
•The symbols on the drawers show different types of frozen goods.
•The numbers indicate storage times
in months for the appropriate types of frozen goods. Whether the upper or lower value of the indicated storage time is valid depends on the quality of the foods and
• By attaching the included |
according to which type of foods the individual compartments contain. |
Appliance does not work no pilot light is illuminated.
Green light does not light up, yellow light lights up when fast freeze fuction is activa- ted, appliance is on.
Yellow light does not light up, when fast freeze fuction is activated, appliance is on.
Appliance cools too much.
Appliance is not switched on
Mains plug is not plugged in or is loose.
Fuse has blown or is defective.
Socket is defective.
Green light faulty.
Yellow light faulty.
Temperature is set too cold.
Switch on the appliance.
Insert mains plug.
Check fuse, replace if neces- sary.
Mains malfunctions are to be corrected by an electrician.
Please inform your local AEG Service Force Centre
Please inform your local AEG Service Force Centre
Press the temperature setting button to a warmer setting.
Defrosting
The freezer will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 4 mm. During this operation it is not necessary to swit- ch off the power supply or to remove the foodstuffs.
However when the ice becomes very thick on the inner liner, complete defrosting should be carried out as follows:
14
11
