What to do if…

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

 

 

 

Possible cause and remedy

 

 

 

 

 

 

 

The residual heat indicator does

 

The cooking zone is not hot because it operated only for a short

 

not comes on.

 

time. If the cooking zone should be hot, speak to the service cen-

 

 

 

tre.

 

 

 

 

 

 

 

 

 

The Automatic Heat Up func-

 

• There is still residual heat on the cooking zone. Let the cooking

 

tion does not operate.

 

 

zone become sufficiently cool.

 

 

 

 

•

The highest heat setting is set. The highest heat setting has the

 

 

 

 

same power as the Automatic Heat Up function.

 

 

 

 

 

 

 

The heat setting changes be-

 

The Power management is activated. See the section Power man-

 

tween two levels.

 

agement.

 

 

 

 

 

 

 

 

 

The sensor fields become hot.

 

The cookware is too large or you out it too near to the controls.

 

 

 

Put large cookware on the rear cooking zones if it is necessary.

 

 

 

 

 

 

There is no signal when you

 

The signals are deactivated. Activate the signals (see OffSound

 

touch the panel sensor fields.

 

Control).

 

 

 

 

comes on

 

The Automatic Switch Off operates. Deactivate the appliance and

 

 

 

activate it again.

 

 

 

 

 

 

 

 

 

comes on

 

• No cookware on the cooking zone. Put cookware on the cook-

 

 

 

 

ing zone.

 

 

 

 

 

 

•

Not correct cookware. Use the correct cookware.

 

 

 

 

•

The diameter of the bottom of the cookware is too small for

 

 

 

 

the cooking zone. Move cookware to a smaller cooking zone.

 

 

 

 

 

 

 

and number comes on.

 

There is an error in the appliance.

 

 

 

 

Disconnect the appliance from the electrical supply for some

 

 

 

 

time. Disconnect the fuse from the electrical system of the house.

 

 

 

Connect again. If

comes on again, speak to the service centre.

 

 

 

 

 

 

comes on

 

There is an error in the appliance, because a cookware boils dry or

 

 

 

you use not correct cookware. The protection against become too

 

 

 

hot for the cooking zone operates. The Automatic Switch Off op-

 

 

 

erates.

 

 

 

 

 

 

Deactivate the appliance. Remove the hot cookware. After, ap-

 

 

 

proximately 30 seconds activate the cooking zone again.

 

 

 

 

should go out of the display, residual heat indicator can stay. Let

 

 

 

the cookware become sufficiently cool and check it with the sec-

 

 

 

tion Cookware for the induction cooking zone.

 

 

 

 

 

 

 

 

 

If you tried the above solutions and cannot repair the problem, speak to your dealer or the customer service. Give the data from the rating plate, three digit letter, code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on.

Make sure, you operated the appliance correctly. If not the servicing by a customer service technician or dealer will not be free of charge, also during the warranty period. The instruc- tions about the customer service and conditions of guarantee are in the guarantee booklet.

Page 14 Page 16
Page 15
Image 15
AEG HK854220FB user manual What to do if…
Page 14 Page 16

HK854220FB specifications

The AEG HK854220FB is a premium induction hob that combines cutting-edge technology with modern design, making it an ideal choice for contemporary kitchens. This versatile appliance is known for its efficiency, safety features, and intuitive controls, ensuring that both novice and experienced chefs can enjoy seamless cooking experiences.

One of the standout features of the AEG HK854220FB is its induction cooking technology. This method uses electromagnetic fields to heat pots and pans directly, rather than warming up the cooking surface. As a result, it offers rapid heating times and precise temperature control, which enhances cooking efficiency. Whether you're searing meat or simmering sauces, the induction hob responds swiftly to changes in heat settings, allowing for precise adjustments based on your cooking needs.

Safety is another key characteristic of the AEG HK854220FB. The hob is equipped with a residual heat indicator that remains illuminated after cooking, alerting users to potentially hot surfaces. Additionally, the child safety lock ensures that young ones cannot accidentally operate the appliance, providing peace of mind for families. The automatic shut-off function also contributes to safety by turning off the hob after a period of inactivity.

The design of the AEG HK854220FB is sleek and sophisticated, featuring a smooth glass-ceramic surface that is not only visually appealing but also easy to clean. Spills and stains can be easily wiped away, making maintenance a breeze. The hob is designed with four cooking zones of varying sizes, providing flexibility in preparing multiple dishes simultaneously.

The AEG HK854220FB further enhances convenience with its touch controls. Users can easily adjust the heat settings and timer functions with a simple swipe of a finger. This intuitive interface allows for quick and easy operation, even in busy cooking environments.

Additional features include a boost function, providing an extra burst of power for high-temperature cooking, and a timer for each zone, allowing for precise management of cooking times.

Overall, the AEG HK854220FB stands out for its combination of advanced induction technology, safety features, user-friendly design, and aesthetic appeal, making it a perfect addition to any modern kitchen.
Top Page Image Contents