Water connection
•Do not connect the appliance with old hoses already used. Only use new ho- ses.
•Make sure not to cause damage to the water hoses.
•Do not connect the appliance to new pipes or pipes not used for a long time. Let the water flow for some minutes, then connect the inlet hose.
•The first time you use the appliance, make sure that the water hoses and the couplings do not have leakages.
Electrical connection
•Make sure that the appliance is earth- ed.
•Make sure that the electrical informa- tion on the rating plate agrees with the power supply.
•Always use a correctly installed shock- proof socket.
•Do not use multiple plugs and exten- sion cables. There is a risk of fire.
ENGLISH 5
•Do not replace or change the mains ca- ble. Contact the service centre.
•Make sure not to cause damage to the mains plug and cable.
•Connect the mains plug to the mains socket only at the end of the installa- tion. Make sure that there is access to the mains plug after the installation.
•Do not pull the mains cable to discon- nect the appliance. Always pull the mains plug.
DISCARD THE APPLIANCE
1.Disconnect the mains plug from the mains socket.
2.Cut off the mains cable and discard it.
3.Discard the door catch. This prevents children or pets to be closed in the appliance. There is a risk of suffoca- tion (only for
TECHNICAL INFORMATION
Dimensions | Width / Height / Depth | 600 / 850 / 522 mm |
| Total depth | 540 mm |
Electrical connection: | Voltage | 230 V |
| Overall power | 2200 W |
| Fuse | 10 A |
| Frequency | 50 Hz |
Level of protection against ingress of solid particles | IPX4 | |
and moisture ensured by the protective cover, except |
| |
where the low voltage equipment has no protection |
| |
against moisture |
|
|
Water supply pressure | Minimum | 0,5 bar (0,05 MPa) |
| Maximum | 8 bar (0,8 MPa) |
Water supply 1) |
| Cold water |
Maximum load | Cotton | 7 kg |
Spin speed | Maximum | 1200 rpm |
|
|
|
1)Connect the water inlet hose to a water tap with a 3/4'' thread.
