26
TROUBLESHOOTING
The start of the appliance does not oc- cur or it stops during operation.
First try to find a solution to the prob- lem (refer to the table). If not, contact the service centre.
With some problems, the acoustic signals operate and the display shows an alarm code:
•
- The appliance does not fill with water.
•
- The appliance does not drain the water.
•
- The appliance door is open or not closed correctly.
WARNING!
Deactivate the appliance before you do the checks.
Problem | Possible cause | Possible solution |
The appliance | The water tap is closed. | Open the water tap. |
does not fill with |
|
|
water. |
|
|
| The water inlet hose is | Make sure that the water inlet |
| damaged. | hose has no damages. |
| The filters in the water in- Clean the filters. Refer to 'Care | |
| let hose is blocked . | and cleaning'. |
| The water tap is blocked | Clean the water tap. |
| or is furred with lime- |
|
| scale. |
|
|
|
|
The connection of the water inlet hose is not correct.
Make sure that the connection is correct.
The water pressure is too low.
Contact your local water authori- ty.
The appliance | The water drain hose is | Make sure that the water drain |
does not drain the | damaged. | hose has no damages. |
water. |
|
|
|
|
|
The filter of the drain pump is blocked.
Clean the filter of the drain pump. Refer to 'Care and clean- ing'.
The connection of the water drain hose is not correct.
Make sure that the connection is correct.
A washing programme | Set the drain programme. |
without the drain phase |
|
is set. |
|
The function Rinse & | Set the drain programme. |
Hold is on. |
|
The appliance | Close the door correctly. |
door is open or |
|
not closed correct- |
|
ly. |
|
|
|
