AEG SKD71800F0 user manual Daily use, Care and cleaning, Installation

Safety information
	5

– thoroughly ventilate the room in which the appliance is situated

•It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock.

WARNING!

Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard.

1.Power cord must not be lengthened.

2.Make sure that the power plug is not squashed or damaged by the back of the ap- pliance. A squashed or damaged power plug may overheat and cause a fire.

3.Make sure that you can come to the mains plug of the appliance.

4.Do not pull the mains cable.

5.If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.

6.You must not operate the appliance without the lamp cover1) of interior lighting.

•This appliance is heavy. Care should be taken when moving it.

•Do not remove nor touch items from the freezer compartment if your hands are damp/ wet, as this could cause skin abrasions or frost/freezer burns.

•Avoid prolonged exposure of the appliance to direct sunlight.

•Bulb lamps2) used in this appliance are special purpose lamps selected for household ap- pliances use only. They are not suitable for household room illumination.

Daily use

•Do not put hot pot on the plastic parts in the appliance.

•Do not store flammable gas and liquid in the appliance, because they may explode.

•Appliance's manufacturers storage recommendations should be strictly adhered to. Refer to relevant instructions.

Care and cleaning

•Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.

•Do not clean the appliance with metal objects.

•Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance.

Installation

For electrical connection carefully follow the instructions given in specific paragraphs.

•Unpack the appliance and check if there are damages on it. Do not connect the appli- ance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.

1)If the lamp cover is foreseen.

2)If the lamp is foreseen.