Safety instructions

Positioning and connection

Follow the separate instructions for positioning and connection and, if necessary, take into consideration the advice of your local chimney sweep or of local authorities.

Check that the appliance has not been damaged during transport. Never connect a damaged appliance! If this is the case, contact your dealer.

The dryer must not be installed in a room where the temperature can fall below zero or higher than + 35°C.

The dryer must be positioned horizontally.

The dryer must not be positioned on a thick pile carpet as this would prevent air from circulating freely through the ventilation slots.

If the appliance is installed near a gas, coal or electric heater, an insulating not-inflammable panel must be inserted between the dryer and the heater (size: 85x57.5 cm).

The plug of the dryer must always be accessible.

The dryer’s exhaust must not be fed into a cooker hood, or a chimney or flue pipe designed to carry the exhaust from a fuel burning appliance.

For correct ventilation of the room, avoid the formation of low pressure.

A permanent connection to the mains power supply can only be carried out by a qualified electrician.

26

Page 5
Image 5
AEG T3 operating instructions Positioning and connection