Important Safety Information
1Important Safety Information
The safety of AEG electrical appliances complies with the established technical principles and statutory equipment safety regulations. Never- theless, as manufacturer we have to draw your attention to the follow- ing safety instructions.
General safety
•Repairs of the dryer may be carried out only by trained personnel. Incompetently carried out repairs can entail considerable hazards for the user. Please get in touch with our customer service or with an authorised AEG dealer when repair is necessary.
•Before commencing operation please make sure that the nominal voltage and type of supply specified on the type plate of the appli- ance correspond to the actual nominal voltage and supply type at the place of utilisation. The fuse rating is also specified on the type plate.
•Never operate the dryer when the mains cable is damaged or when the operator control mask, work plate or base shrouding are damaged such that there is direct access to the interior of the appliance.
•
•If the appliance will be out of operation for an extended period of time, unplug it from the mains.
•Never pull on the cable to disconnect the mains plug from the power outlet. Always grasp and
•Don’t lean on the opened door; this could make the appliance fall over.
•Don’t use a water jet to
•When closing the door, please check that the washing is not caught in it.
•If you interrupt the drying process to take out laundry, bear in mind that the laundry and the drum could be hot.
•Adaptors and extension cables must not be used. There is risk of fire because of overheating!
5
