AeroComm CL4490-1000 4. CL4490/CN4490 Configuration Utility Software

CL4490 User’s Manual

4. CL4490/CN4490 Configuration Utility Software

AeroComm provides the easy to use CL4490/CN4490 Utility Software for programming the

CL4490/CN4490. The GUI based software does not require any hardware configuration and

works by itself. The software is compatible with Microsoft® Windows 95, 98, 2000, Me, NT and

XP. CL4490/CN4490s are plug-and-play devices that work with minimal or no configuration.

However, users may refer to the AC4490 manual for details about the radio’s operation and

advanced configuration commands. The SDK Software can be used to evaluate the advanced

configuration commands. The SDK Software and AC4490 manual can be found on the Connex

Tools and Literature CD or on our website at http://www.aerocomm.com/.

Note: The users should refer to the ConnexNet manual for details about the CN4490

interface.

1. Locate the CL4490 Configuration Utility, 900 MHz link in the Software section on the

Connex Tools & Literature CD. This software is also available at

http://www.aerocomm.com/Software/Driver_CL4490_900Mhz_v.1.zip.

2. When prompted, accept the default directory or change to the desired directory where the

program files will be installed.

3. When finished, a window will be displayed indicating a successful installation. Select OK.

The configuration utility can be used to configure both CL4490 and CN4490. The configuration

utility defaults to CL4490 configuration when it is loaded; it can be used to configure the CN4490

by checking the CN4490 check box on the configuration page.

10/3/2005 15