AeroComm SPH Series P2000TRANSCEIVERSYSTEM, Ing. Approved & in use by DHS, DOS, US ARMY, Usaf

TACTICAL COMMUNICATIONS EQUIPMENT

TACTICALAUDIOCONTROLLER

The N301A provides upgraded performance in a plug compatible replacement for the A301-6. Many improvements have been incorporated such as extensive noise suppres- sion and fully floating inputs to remove ground-loop or common mode noise. Both high and low impedance headsets are supported and mic outputs can be individually adjusted for each transceiver.

The N301A can be utilized in new installations where single or multiple user networks (up to 10 stations) are required. User controlled features of the N301A include split RX and ICS volume controls, VOX squelch control, an additional RX input for the AUX TX position and an extra Nav Aid position. Additional internal inputs have been added to improve airframe alerting capability. Each panel is self-contained, with solid state modular plug-in construction, sealed switching devices for low noise and gold switch/relay contacts for long life. Other features of the N301A include a CVR output, TX annunciator light, Emergency mode switch, and a second connector to permit supplemental inputs with two additional ICS buses (PVT & NAT) to support more complex ICS networks. A VOX circuit and front panel control on the N301A series provide the convenience of voice activated intercom.

NAT offers the N301A in standard configurations or customized panel layouts, with 5 VDC or 28 VDC standard Blue/White lighting, plus optional NVG compatible light-

ing. Approved & in use by: DHS, DOS, US ARMY, USAF

Multiple Faceplate

Configurations Available

Call for P/N &

Pricing

P/N: N301A

UNIVERSALRADIOINTERFACE

The AA34-300 addresses the interface and switching requirements of mobile radios and telephones allowing them to be integrated with an aircraft audio system. The unit provides microphone excitation, impedance and level matching, relay keying and sidetone generation, all fully isolated from aircraft ground. The unit features floating key lines, radio audio, sidetone and microphone amplifiers, floating audio lines in and out, internal mic exciter with adjustable output and internally selectable functions and levels. Approved & in use by: US ARMY, USFS, USAF, DOS

P/N: AA34-300

NPXSERIESGENERALDESCRIPTION

NAT’s family of self contained panel mount FM transceivers are designed as stand- alone, mission specific radios. Their lightweight compact design is perfect for the space and weight restriction of helicopters and light fixed wing aircraft. Incorporating NAT’s proven, user friendly Tac/Com II™operating system, the NPX series is simple to pro- gram and easy to use. Main volume control and a scan select switch are conveniently located beside the display. The squelch test, channel up/down, and display brightness controls are easily identified along the bottom of the panel. A separate guard volume and guard transmit select switch is provided. With no complex patterns or codes to memorize, the NPX’s straight forward controls and online “Help” screens insure intui- tive operation. PC software is available for fast, convenient programming of complete channel information. The capability to upload and download NPX channels allows users to store multiple sets of operating frequencies for quick transitions between con- tract assignments. These compact radios incorporate solid chassis construction, user friendly controls and are tested to stringent aircraft environmental standards. Whether the mission is forestry, law enforcement, business communications or other applica- tions, the NPX family of radios will satisfy the most demanding operational needs.

ANALOGPUBLICSERVICEBANDRADIO

This USFS compliant radio was specifically designed to fulfill contract required functionality. The synthesized frequency-agile transceiver allows easy access to all pre- programmed channels and the ability to modify or add channels on the fly.

At less than 2” high and 3 lb., NAT’s self-contained panel mount NPX138 radios are designed as stand-alone units for the single mission user. The lightweight state-of- the-art compact design is perfect for the space and weight restricted environment of a helicopter or light fixed-wing aircraft.

Each of the 100 memory channels available can store a receive frequency with CTCSS tone, a transmit frequency with CTCSS tone, scan function and an alpha-numeric identifier on a 32 character LED display. Transmit power of 1 or 10 watts is easily selectable from the front of the NPX. Operating Frequency: 138- 174 MHz

The optional synthesized two channel guard receiver allows front panel tuning of user frequencies, ensuring communication integrity during complex flight operations. Each individual channel is operator selectable for wide (5 kHz deviation) and narrow band (2.5 kHz deviation) operation. DTMF encoding and direct keyboard programming can be added using NAT’s DTE12.

Panel lighting is available in either 28, 14 or 5 VDC controlled through the aircraft dimmer bus. NVG compatible lighting is optional.

AWR Approved in UH-60, UH-1 & CH-47

P/N: NPX138N-070

P2000TRANSCEIVERSYSTEM

The newest member of the Flexcomm family – the new P-2000 digital/analog tactical FM radio – was designed to provide maximum communications capability for aircraft with limited space. In addition to the efficient panel-mounted design, the multi-band P-2000 features a brilliant color LCD display that highlights critical information in an easy to read format.

The P-2000 delivers P-25 functionality and interoperability on one or two public service bands, yet its small Dzus rail footprint belies its robust performance on the VHF, UHF and 800 MHz bands. The system also provides maximum flexibility for those applications requiring separate crew and/or pilot radio control.

It’s a focused and versatile solution for those who communicate on the tactical environment, and the P-2000 is ideal for airborne law enforcement, air medical rescue, homeland defense and other public service operators.

Call for Configuration & Pricing Information

P/N: P-2000

DIGITALPUBLICSERVICEBANDRADIO

This digital radio is a complete, self contained VHF panel mount APCO Project 25 compliant transceiver, capable of transmitting and receiving over the entire VHF band (136.000 - 173.997 MHz). An internal frequency agile synthesized guard receiver, and soft push button keypad are standard equipment. Operation is Project 25 and conven- tional Analog Simplex or Semi-Duplex.

Designed to Advanced Industry Standard: APCO Project 25 FDMA common air interface for complete interoperability.

Multi-Mode: Digital P25 and Analog wideband/narrowband, 16 zones, 257 channels total. Available with or without 2-Channel Sythesized Guard

Operating Frequency: 136 - 174 MHz

Backward Compatible: with existing wideband and narrowband analog FM systems on a channel for channel basis.

Future Options: Secure Transmissions: SBCF DES wideband analog encryption; APCO Project 25 narrowband digital OFB DES encryption option, will be available in future. Available to Federal, State & Local Gov. Agencies via

WSCA Contract #02702

P/N: NPX136D-070

6 www.edmo.com EDMO Distributors, Inc. Call for Pricing! 1-800-235-3300