AeroGarden 100733-DSS Basic Reminders About Your AeroGarden, AeroGarden PRO200 Control Panel

Basic Reminders About Your AeroGarden

AeroGarden PRO200 Control Panel

• Water Low

When light blinks add water up to “Fill To Here.”

• Lights On/Off

Use to occasionally override built-in light timer. Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/ off. This will not affect the timing of your light cycle and occasional use of this feature will not harm your plants.

• Add Nutrient

(Feed Garden - Basic Feeding)

When “Add Nutrient” and “Water Low” lights start blinking (every

2 weeks), add 2 nutrient tablets* and fill the Bowl with water up to “Fill to Here.” Press and release “Reset” button to restart nutrient timer and turn off blinking lights.

*See Tending & Harvesting Guide for plant-specific nutrient information.

• Replace Grow Bulbs*

When light blinks (after 6 months of use), it is time to replace Deluxe Grow Bulbs. Bulbs can be ordered at www.aerogardensupport.com or from your retailer. After replac- ing Deluxe Grow Bulbs, press “Reset” button to restart grow bulb timer and turn off flashing light.

NOTE: If you store your AeroGarden PRO200 between uses, grow bulb timer automatically stops when PRO200 is unplugged.

*See complete replacement instructions on next page.

• Adaptive Intelligence

The green light tracks garden growth from germination through maturity. AeroGarden PRO200 automatically adjusts the amount of light and water plants receive to provide op- timal growing conditions for every stage of a plant’s life.

NOTE: The time of day your lights turn off may change as your Garden matures.

•Remove Bio-Domes

When plants appear through hole in Seed Pod Labels, remove Bio-Domesand discard or recycle.

NOTE: Never remove Seed Pod Labels.

11