REPLACING LAMP HOOD
(For AeroGarden Classic, AeroGarden Deluxe, AeroGarden PRO100 and AeroGarden PRO200)
Remove Lamp Hood from Lamp Arm:
1Unplug AeroGarden; remove Bowl from Base.
2Disconnect Lamp Cord from Lamp Hood socket and remove Grow Bulbs from Lamp Hood. CAUTION – Grow Bulbs may be hot!
3Turn AeroGarden around so the back is facing you.
4Press in on Locking Tab 1 located on Lamp Hood vent.
5At the same time, use other hand to push up on silver ring (where Lamp Hood attaches to Lamp Arm).
Locking
Tab 1
Lamp
Hood
Lamp Arm 
Base
To install Lamp Hood:
1Push Lamp Cord firmly into socket in new Lamp Hood.
2Center hands over Lamp Arm and push Lamp Hood down until you hear a “click.”
3Insert Grow Bulbs; return Bowl to Base; and plug in AeroGarden.
Refer to your Quick Start Guide for more help or find it online at www.aerogardensupport.com.
© 2008 AeroGrow International, Inc.
300417AA 6/3/08
