Getting Started 29Chapter 1
Example:
Straight-Through
Configuration
Any channel of the terminal module can be configured as a straight-through
Form C relay. In this mode no resistors or capacitors are included. A
two-position jumper is placed on the mode selection jumper. Figure 1-16
shows a typical straight-through configuration. No components are added .
Set one configuration jumper as shown in Figure 1-16 (INLINE).
Figure 1-16. Example: Straight-Through Configuration
TERMINAL
MODULE SWITCH
MODULE
Channel 25
COM
NC
NO
Channel
Configuration
Jumpers
Number
Channel
User
Wiring
To
Terminal
Module
RP16-23
RP24-31
and associated pullup voltage (for optional standup resistors)
User Supplied Resistor Packs (SIP) Locations
V24-31
V16-23
RP8-15
V0-7
V8-15
RP0-7
Channel Capacitor
Solder Holes
Channel Resistor
Solder Holes
NO
NC
COM COM
NC