Agilent Technologies E4400-90363 Fully Coded 3GPP 3.2 3-00 W-CDMA, Enhanced Bluetooth capability

ESG Family Signal Generators Agilent Technologies ESG Family Feature Releases

Release		Feature	Minimum Hardware Required	Firmware
Date				Required
10/00	•	Fully Coded (3GPP 3.2 3-00) W-CDMA	ESG-D “B” with Opt. UN8 Rev. C or better	≥	B.03.60
		personality for user equipment	(Baseband Fuzzy board E4400-60070 and
		(downlink) and base station (uplink)	Flex DG board E4400-60154)
		testing, Opt. 200 (initial release). Based
		on the following 3GPP Technical
		Specifications: 3G TS 25.101 V3.2.2
		(2000-04) for user equipment testing and
		3G TS 24.141 V3.1.0 (2000-03) for base
		station testing.
	• Added reverse link capability to the
		Real-Time cdma2000 personality for
		fully coded base station testing, Opt. 201
	• Added signal-selection capability for
		certain BNC output connectors to the
		Real-Time cdma2000 personality,
		Opt. 201
	•	Enhanced Bluetooth capability,	Opt. UND Rev. A or better (Dual Arb board
		Opt UND. Added sine frequency drift	E4400-60069 or E4400-60187)
		impairment, AWGN, continuous PN9
		sequence, and clock/gate signal for BER
		testing.
9/00	•	Changed Walsh code assignments for	Opt. UND Rev. A or better (Dual Arb board	≥	B.03.51
		reverse link channels to match	E4400-60069 or E4400-60187)
		specifications, Opt. 101
	• Changed reverse link Q long code
		from 1 chip advance (relative to I
		long code) to 1 chip delay, Opt. 101
	• Correctly display the power when
		PSCH and SSCH channels are on at
		the same time, Opt. 100
	• Removed 307200 rate for RC3 suppl 1
		and suppl 2 traffic channels, Opt. 101
	• Replaced a suppl 1 traffic channel in
		reverse link 5 setup with a suppl 2
		traffic channel, Opt. 101
	• Changed cdma2000 spread rate
		default to SR1, Opt. 101
7/00	•	Improved ACP, Opt. H99 (Revision B)	ESG-D/DP “B” with Opt. H99 (Revision B)	≥	B.03.50
			or better (A9 Output Board, E4400-60188)

E4400-90363 3