5CHGV[￿5[ODQNU

)GPGTCN￿5CHGV[￿+PHQTOCVKQP

The following general safety precautions must be observed during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Agilent Technologies assumes no liability for the customer’s failure to comply with these requirements.

WARNING This is a Safety Class I instrument (provided with a protective earthing ground, incorporated in the power cord). The mains plug shall only be inserted in a socket outlet provided with a protective earth contact. Any interruption of the protective conductor inside or outside of the instrument is likely to make the instrument dangerous. Intentional interruption is prohibited.

DO NOT operate the product in an explosive atmosphere or in the presence of flammable gasses or fumes.

DO NOT use repaired fuses or short-circuited fuseholders: For continued protection against fire, replace the line fuse(s) only with fuse(s) of the same voltage and current rating and type.

DO NOT perform procedures involving cover or shield removal unless you are qualified to do so: Operating personnel must not remove equipment covers or shields. Procedures involving the removal of covers and shields are for use by service-trained personnel only.

DO NOT service or adjust alone: Under certain conditions, dangerous voltages may exist even with the equipment switched off. To avoid dangerous electrical shock, service personnel must not attempt internal service or adjustment unless another person, capable of rendering first aid and resuscitation, is present.

DO NOT operate damaged equipment: Whenever it is possible that the safety protection features built into this product have been impaired, either through physical damage, excessive moisture, or any other reason, REMOVE POWER and do not use the product until safe operation can be

￿

Page 3 Page 5
Page 4
Image 4
Agilent Technologies E4416A, E4417A manual GPGTCN5CHGV+PHQTOCVKQP
Page 3 Page 5

E4417A, E4416A specifications

Agilent Technologies, a renowned leader in measurement and test equipment, offers a range of power meters, including the E4416A and E4417A models, which are popular for their precision and reliability in field and laboratory settings. These power meters are designed to facilitate accurate power measurements, particularly in the RF and microwave frequency ranges, making them indispensable tools in telecommunications, broadcasting, and various research applications.

The Agilent E4416A is a versatile power meter that can handle average power measurements across a wide frequency range from 10 MHz to 18 GHz. It boasts a measurement accuracy of ±0.5% of reading, ensuring that users receive precise data critical for their testing and development processes. Its large graphical display and intuitive user interface simplify operation and data interpretation, enabling users to quickly obtain and analyze their measurements.

Another standout model, the E4417A, elevates measurement capabilities further with enhanced specifications for high-frequency applications. It supports frequencies up to 30 GHz, making it suitable for modern communication systems demanding higher bandwidth and speed. The E4417A can also measure both average and peak power, providing versatility for a range of signal types, including CW, pulsed, and modulated signals. This feature proves beneficial in applications such as radar testing, wireless communications, and electronic warfighting systems.

Both models utilize Agilent's advanced thermocouple sensor technology, which allows for rapid and reliable power measurements. The sensors are designed to maintain accuracy over time, reducing the need for frequent calibrations. This technology, combined with their rugged design, makes the E4416A and E4417A power meters ideal for both laboratory and field testing scenarios.

Another key feature is the built-in memory functionality that enables users to store and recall measurement results, streamlining workflow and increasing efficiency in data management. Furthermore, these instruments come equipped with remote interface capabilities that support various connectivity options such as USB, GPIB, and LAN, allowing for easy integration into automated test systems.

In summary, the Agilent E4416A and E4417A power meters are distinguished by their exceptional performance, accuracy, and versatility. Their advanced measurement capabilities and user-friendly features make them necessary tools for engineers and researchers working in fields that require precise power measurements, underpinning the efficacy of their operations and innovations.
Top Page Image Contents