Agilent Technologies J6800A manual Configuration Information

Configuration Information	The Network Analyzer family consists of four hardware analysis platforms: the Network
	Analyzer, Distributed Network Analyzer (DNA), Distributed Network Analyzer MX (DNA
	MX) and Distributed Network Analyzer ME (DNA ME). The last of these has built-in NDIS-
	based LAN interfaces and the remaining three accept a range of line interface modules
	(LIMs), which are completely interchangeable.
	The Network Analyzer, DNA, DNA MX, DNA ME, and Network Analyzer Software all
	include one year of Agilent AdvantageTM support at no additional cost. Agilent
	AdvantageTM support includes call center support, software update service, and web-
	based instructor-led training. A number of other support products and education are
	available for Network Analyzer products for an additional fee.
	The J6800A Network Analyzer is an “all under one handle” solution with a built-in PC and
	can accept up to two LIMs in any combination; these must be ordered separately. This
	analyzer is also shipped with a USB optical mouse, two CD RW media, recovery CD
	media, and power cord (localized for the country of sale).
	The J6801A Distributed Network Analyzer is a solution for dispatched and distributed use,
	designed to be controlled from a standard PC running Microsoft Windows® 2000, XP or
	NT 4.0 (Service Pack 5 or greater) via a LAN connection. It can accept any of the
	available LIMs; these must be ordered separately. It can also be attached to the Network
	Analyzer and Distributed Network Analyzer MX platforms to provide additional ports.
	The J6802A Distributed Network Analyzer MX is a solution with a built-in controller
	running Network Analzyer Software for remote dispatched and distributed use, designed
	to be accessed from a standard PC running a basic version of Network Troubleshooting
	Center on Microsoft Windows® 2000, XP or NT 4.0 (Service Pack 5 or greater) via a LAN
	or dial-up connection. It can accept any of the available LIMs; these must be ordered
	separately.
	The J6805A Distributed Network Analyzer ME is an enterprise LAN solution with a built-in
	controller for distributed use, designed to be accessed from a standard PC running a basic
	version of Network Troubleshooting Center on Microsoft Windows® 2000, XP or NT 4.0
	(Service Pack 5 or greater) via a LAN connection. It has two built-in half-duplex
	10/100Base-TX test interfaces and can test two half-duplex circuits or one full-duplex circuit.
	Network Analyzer Software is pre-loaded and fully enabled on the Network Analyzer,
	Distributed Network Analyzer MX and Distributed Network Analyzer ME. Network
	Analyzer Software on CD media plus a single-use license key is shipped with the
	Distributed Network Analyzer. The J6840A Network Analyzer Software is a productized
	version of this software available for operation on any PC running Microsoft Windows
	2000, XP or NT 4.0.
	The Network Troubleshooting Center (NTC) software provides the means to perform
	centralized testing using the various Network Analyzer hardware platforms (particularly the
	J6802A and J6805A), and can also access information using SNMP/RMON/RMON2
	from network equipment MIBs. A basic version of NTC software is shipped with all
	Network Analyzer family hardware platforms, with the ability to remotely access and
	control Network Analyzer platforms, perform SNMP-based data collection from up to four
	data sources simultaneously (analyzers from the Network Analyzers family or interface
	MIBs), and manage many agents. NTC also offers add-on distributed test applications,
	including NTC RMON (J6782A) and NTC WLAN (J6783A).

2