SHOWN FULL SIZE
GI
A | B | C | D | E | F |
| H |
K | J |
L | NOT SHOWN FULL SIZE |
|
M
N
O 
P
REF. | QTY. | DESCRIPTION | REF. | QTY. | DESCRIPTION |
A | 1 | Hex Bolt, 3/8" x 1" | I | 10 | Flat Washer, 1/4" |
B | 2 | Hex Bolt, 1/4" x | J | 3 | Nylon Washer |
C | 1 | Hex Bolt, 1/4" x | K | 1 | Hitch Pin |
D | 2 | Hex Bolt, 1/4" x 3/4" | L | 1 | Hair Cotter Pin, 1/8" |
E | 16 | Hex Bolt, 1/4" x 5/8" | M | 1 | Transport Handle Grip |
F | 1 | Carriage Bolt, 1/4" x 3/4" | N | 1 | Control Arm Grip |
G | 24 | Nylock Nut, 1/4" | O | 1 | Plastic Knob |
H | 1 | Nylock Nut, 3/8" | P | 2 | Ferrule |
ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
(2)7/16" Wrenches
(2)1/2" Wrenches
(2)9/16" Wrenches
(2)3/4" or Adjustable Wrenches (for optional wheel removal in figure 5)
Spike points are sharp. Exercise caution when working with hands near spike disks.
1.Remove the hardware pack and all individual parts from the carton and lay out as shown on pages 2 and 3.
2.Assemble the end of the tongue to the hopper as shown in figure 1 using two 1/4" x 5/8" hex bolts and 1/4" hex nuts.The holes are located just below the frame assembly tube. Do not tighten yet.
1/4" x 5/8"
HEX BOLT
FRAME ASSEMBLY TUBE
TONGUE
1/4" NYLOCK NUT
FIGURE 1
3