SERVICE AND ADJUSTMENTS

WARNING: Shut off (disengage) the Tine

Clutch Lever, the Tiller Engine and the Tractor

Engine before making any repairs.

TO REPLACE V-BELT

 

Replace V-belt if it has been damaged considerably from

 

slipping under heavy loads or if it show cracks or frayed

 

edges. Refer to figures 11 and 12.

 

IMPORTANT: Do not move or remove the belt guide.

 

If the position of the belt guide is accidentally altered,

 

return it to the correct setting (6-1/2" above the tine shield

 

support plate).

 

• Remove the screw from the top of the belt guard.

 

• Remove the hex nut from the rear of the guard.

 

• Remove the belt guard to allow access to drive belt.

 

• Disengage tine clutch lever and remove belt.

FIG. 12

• Reverse above procedures for installation of new belt.

 

FIG. 11

11