Remove the CO Alarm when decorating.Do not allow water or dust to contaminate the
alarm.
Warning: Do not open or tamper with the CO Alarm. There are no user serviceable
parts. This can damage the unit and may expose the user to shock or fire hazards.
END OF LIFE
When the unit has completed up to 6 years of operation the amber light will flash every
40 seconds. The entire unit must then be replaced.
It must also be replaced when the date on the ‘Replace unit by’label on the side wall
is exceeded.
Product Disposal
The crossed out wheelie bin symbol on the product means that it should
not be put into household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
The date code on the product indicates when the product was manufactured e.g.
05W40 means week 40 in the year 2005.
How to disconnect and remove the alarm:
Ei225EN only
1. First disconnect the mains supply to the CO Alarm circuit at the distribution / fuse
board.
2. Slide cover up as shown in figure 1.
21