WIRING DIAGRAM:
Cat5e
Connect the reader to the host according to the wiring table at right and the host installation guide.
20" pigtail cable
Wiegand | Wire Color |
+ DC | Red |
Ground | Black |
Data0 | Green |
Data1 | White |
Shield Ground | Drain |
Green LED | Orange |
Red LED | Brown |
Beeper | Yellow |
Hold | Blue |
Card Present | Violet |
Output to Host
Access Control System
Dry contact to
Access Control System
| DOOR RELEASE RELAY |
|
| POWER |
| |||||
L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 |
|
|
|
VIDEO OUT
V1 V2
| D1 |
|
| D3 |
|
| D5 |
| D7 |
| D2 |
|
| D4 |
|
| D6 |
| D8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AIPHONE
M1 | M3 | VCH1 VCH2 |
| |
M2 | M4 |
|
| |
|
|
| ||
|
| X1 OUT X2 | CO | + - + - |
|
| |||
|
|
|
Cat5e
- |
+ |
- |
+ |
TESTING AND OPERATION:
When power is applied to the card reader, the LED will flash green three (3) times while the beeper beeps simultaneously. The LED will then turn red. This indicates that the microcontroller is operating properly.
Present an ID card to the reader. (Hold card directly in front of reader.) The LED will momentarily turn green while the beeper beeps once, indicating that the card was read successfully.
SPECIFICATIONS:
CARD READER: |
| VIDEO DOOR STATION: |
| |
Model: | HID 6005B | Camera unit: | CCD Camera |
|
Power Source: | 5 ~ 16V DC | Scanning line: | 525 lines |
|
Current Requirements: | 30mA (Avg); 75mA (peak) | Min. illumination: | 5 Lux at 1' or less |
|
Transmit Frequency: | 125 kHz | Terminations: | RJ45 |
|
Card Formats: | Up to 85 bits | Operating Temperature: |
| |
Terminations: | Wiring Distance: | 980' with Cat5e |
| |
Wiring Distance: | 500' to Host | Dimensions: |
|
|
Operating Temperature: |
| |||
Operating Humidity: |
| |||
| With | |||
|
|
|
| |
Aiphone Communication Systems |
|
|
| |
1700 130th Ave. N.E. |
|
|
|
|
Bellevue, WA 98005 | TOLL FREE TECHNICAL SUPPORT: | Pg. 2 | ||
(425) |
| (800) |
| |
| ||||
FAX (425) |
|
| 1010JD |